COGA Sound SLV-L Large Wireless Sleeve

Share

NOTE: This SLV-L Large Wireles Sleeve model comes with an open top and bottom. See description below for wireless receiver compatibility. Requires selection of BPS Clip System (additional cost) to work.

COGA Sound Wireless Sleeves are the ultimate mounting solution for wireless receivers and transmitters. Using any of the required BPS Clip System (must select clip choice prior to checkout; additional cost), Wireless Sleeves are an easy and quick addition to any sound bag, cart, remote speakers, or anything else.

There are currently three Wireless Sleeve models: Slot Receiver Sleeves, Large Wireless Sleeve, and Camera Link Sleeve

Slot Receiver Sleeves
Compatible with all Super Slot type receivers, and features a pass through connector providing power to the receiver, and outputs for up to 2 channels of analog audio or 4 channels of AES3 digital audio. It is available with a 5-pin mini-XLR output connector (SLV-SR5 model), or dual 3-pin mini-XLR (SLV-SR3 model) output connectors. With this lightweight, slim design, you will never need to swap output plates on your slot receivers again. If you do need to use a different output plate, the bottom section with connectors can be removed allowing any Slot type receiver to easily attach anywhere you need it. How-to-use instructions. Important: Slot Receiver Sleeves are NOT compatible with Unislot type receivers.

Compatible with: Audio Limited A10, Lectrosonics SR and DSR, Sennheiser EK 6042, Shure ADX5D, Sony DWR-S03D, Wisycom MCR42S and MCR54, and Zaxcom SRX 220

Large Wireless Sleeve
Compatible with Lectrosonics 411, 822 receivers, T1 and T4 transmitters and Zaxcom QRX Series Receivers. The sleeve securely holds the receiver with an open top and bottom for easy, convenient access to connectors and control buttons. It is perfect for attaching a receiver anywhere you need wireless audio, from sound bags and carts to playback speakers. How-to-use instructions.

Compatible with: Lectrosonics 822, 411, 211, T4, and T1; Zaxcom QRX (non-IFB), and MicPlexer

Camera Link Sleeve
Fits the full line of Zaxcom Camera Link and IFB200/300 transmitters. Featuring the same open top and bottom as the Large Sleeve, it's perfect for adding a transmitter to a tiny run-and-gun bag, mounting one to a sound cart, and everything in between. How-to-use instructions.

Compatible with: Zaxcom TRXCL3/4/5, TRX900CL, and IFB200/300

Package includes:

• (1) Wireless Sleeve
• (1) Hex Key
• (1) Spare M3 x 8mm flat head screw
• (1) BPS Clip System of choice (must specify prior to checkout):
  • BPSA-B Bag Anchor Clip - works with any bag with a receiver strap
  • BPSA-M MOLLE Clip - designed to work on the outside of K-Tek and MOLLE bags
  • BPSA-O Buddy Lok Style Clip - designed to work on the outside of Orca bags
  • BPSA-P Mod-U-Lox Style Clip - designed to work on the outside of Schatler, Petrol, and Protogear bags