HME CZ11513 4-Up DX210 Wireless Intercom System w/ (5) HS15 Headsets

Share

The HME DX210 offers the perfect blend of wireless intercom performance, system compatibility with wired intercom systems, and ease of use. Operating in the 2.4GHz band, the DX210 delivers exceptional sound clarity and enables interference-free communication for highly demanding productions.

The HME DX210 is a two-channel intercom system that has advanced the capabilities of the legendary DX200. The DX210's wired intercom interface is now compatible with Clear-Com's or RTS' 2-wire systems, and provides two separate 2-wire and 4-wire interconnections. In single channel mode, the powerful 1RU base station supports up to 16 full-duplex and 44 half-duplex beltpacks and/or wireless headsets by linking four base stations. The DX210 is paired with the rugged BP210 beltpack and All-in-One WH210 Wireless Headset COMMUNICATOR®s, which have two intercom buttons (IC1/IC2) with ISO. The system is also backward compatible with the DX200 COMMUNICATOR models such as BP200, WH200 and WS200 (Wireless Speaker Station).

The CZ11513 DX210 System w/ HS15 Headset includes:

• (1) BS210 Base Station
• (5) HS15 Single Muff Headset with Noise Cancelling Mic
• (4) BP210 Beltpack
• (4) Beltpack Pouch
• (8) BAT41 Li-ion Rechargeable Battery
• (1) AC40A Battery Charger
• (2) 12VDC 60W Power Supply (100/240VAC Universal)
• (2) 115VAC Power Cord

• System:
  • Frequency Range:
    • All Band: 2400 - 2483.5 MHz
    • Low Band: 2401.9 - 2439.9 MHz
    • High Band: 2443.4 - 2481.4 MHz
  • Frequency Response: 200 Hz - 3.5 kHz
  • Security: 64-bit encryption
  • Temperature Range: -32 to 122° F | 0 to 50° C, typical
  • FCC Acceptance: Part 15 (no license required)
  • Transmit/Receive Type: Frequency-Hopping Spread Spectrum (FHSS)
  • System Transmit:
    • Transmit Power: 100mW burst
    • Transmission Modes: Continuous (Latched) or Push-to-Talk (PTT)
    • Modulation Type: Gaussian filtered FSK, TDMA
  • System Receive:
    • Sensitivity: < -90 dBm with 10⁻³ BER
    • Distortion: < 2%
• BS210 Base Station:
  • TX & RX Antenna: 1/2 wave, dual diversity dipole
  • 4-Wire I/O: RJ-45, 600 Ω balanced, level adjustable, simultaneous operation with 2-wire (x2)
  • 2-Wire I/O: XLR-3F & 3M, externally-switchable RTS or ClearCom Mode, 200 Ω, null adjustable
  • Auxiliary Input: XLR-3F/1/4" phone combo jack, 600 Ω balanced, level adjustable
  • Auxiliary Output: XLR-3M, 600 Ω balanced, level adjustable
  • Headset Connector: 4-Pin Mini-DIN
  • Headset Output: 250 mW into 32 Ω
  • Power Requirements: 100-240 VAC, 50-60 Hz or 12-14 VDC
  • Size: 19 x 1.72 x 13.5 in | 48.26 x 4.37 x 34.29 cm
  • Weight: 9 lbs | 4.1 kg
• BP210 Beltpack:
  • Battery Requirements: (1) Lithium-Ion, rechargeable
  • Battery Life:
    • Latched (Hands-Free): Up to 14 hours
    • PTT: Up to 20 hours
  • Headset Connector: Mini-DIN
  • Mic Input: Electret
  • Headset Output: 160 mW into 32 Ω capable of driving 16-32 Ω
  • Controls:
    • Volume On/Off
    • Volume Up/Down
    • Talk Intercom
    • Talk ISO
  • Indicators: Power/transmit/low battery LED and voice prompts
  • Size: 3.4 x 2.6 x 1.5 in | 8.64 x 6.6 x 3.81 cm
  • Weight: 7.4 oz | 0.21 kg, with battery and pouch