K-Tek KP16 16 Ft. Mighty Boom Graphite, 6-Section Boom Pole, Uncabled

Share

The K-Tek KP16 Mighty Boom Pole has a collapsed length of 44" / 111.8 cm and an extended length of 9' / 4.88 m and only weighs 2.0 lbs / 0.9 kg. This 6-section boom pole features a removable headpiece for cable reconfiguration without soldering. The top attachment is a 3/8" - 16 male thread and the bottom has a removable rubber bumper.

The Mighty Boom poles offer increased interchangeability with its removable headpiece. Gone are the soldered and sealed poles of the past. Today's redesigned headpiece, after removing a standard sized set screw, simply threads on and off the tube smoothly. The cable of choice can be removed or installed without soldering. The boom pole is readily transformed to un-cabled, coil cabled, straight cabled or with a transmitter at the top or the bottom. There are no more time-consuming transformations and no need to purchase a completely new system just to comply with a cabling change.

K-Tek has designed poles that are more rigid and have a shorter collapsed length that is desired in today's production environment. Mighty Boom's maintain the original light weight of the tubes, yet the improved design features added strength. Furthermore, adding a sixth section and wider tubes increases the stiffness and optimizes handling balance. The result is quicker cuing and more user control of the microphone.

Another design improvement is a change to the locking collars. The traditional K-Tek captive collett has been modified with a thicker yet smoother surface allowing for more subtle, gradual extension of each section. A new anodizing process combined with changing the exterior dimples to oval divets gives a better grip and smoother feel when opening and closing each collar. The finish between the tubes has also been modified so the Mighty Boom sleekly glides open and closed. The Mighty Boom poles are hand-burnished to diffuse handling noise.

The KP16 is compatible with the KPCK16 Cable Kit and bottom (KPCCR) module to allow for a coil cable option with a side XLR exit.