DPA SC4098 Supercardioid Podium or Hanging Microphone, 15cm, with MicroDot Connector - Black

Share

This SC4098-BM15 model is Black, has a 15cm gooseneck length, and comes with a MicroDot termination.

The DPA d:screet SC4098 Supercardioid Podium Microphones deliver clean, high intelligible sound ideal for use when a speaker is addressing a crowd. Designed around the d:screet line of Miniature Microphone Capsules and interference tube technology, the SC4098 also offers controlled directionality with rejection of background noise.

The DPA SC4098 lends itself to a host of applications such as hanging mic applications or for a wireless podium solution. Available with a MicroDot connector, the SC4098 is suitable for a wireless setup. You don't need cables across the stage—simply connect the podium microphone with a wireless transmitter. Your stage setup is more flexible than ever.

DPA d:screet SC4098 - Features:

• Outstanding audio quality
• Wireless podium mic capability
• Highly directional, very isolated
• High rejection of radio frequency interference

• Directional Pattern: Supercardioid
• Principle of Operation: Pressure gradient
• Cartridge Type: Pre-polarized condenser
• Frequency Range: 20 Hz - 20 kHz
• Frequency Range, ± 2 dB, at 20 cm (7.9 in):
  • MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz
• Sensitivity, Nominal, ± 3 dB at 1 kHz: 16 mV/Pa; -36 dB re. 1 V/Pa
• Equivalent Noise Level, A-Weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
• Equivalent Noise Level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
• S/N Ratio (A-Weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 71 dB(A)
• Total Harmonic Distortion (THD): < 1% up to 125 dB SPL peak
• Dynamic Range: Typ. 102 dB
• Max. SPL, Peak Before Clipping: 135 dB
• Output Impedance: From MicroDot: 30 - 40 Ω
• Minimum Load Impedance: 2 kΩ
• Cable Drive Capability: Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
• Output Balance Principle: Signal balanced with XLR connector or DAD6001 XLR Adapter
• Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
• Power Supply (for full performance): MicroDot: Min. 5 V to max. 50 V through DPA adapter for wireless systems or 48 V phantom power ± 4 V with DAD6001-BC XLR adapter
• Current Consumption: Typ. 1.5 mA (microphone); 3.5 mA with DAD6001 XLR Adapter
• Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
• Temperature Range: -40° to 113° F | -40° to 45° C
• Relative Humidity (RH): Up to 90%
• Connector: MicroDot
• Microphone Length: 5.5 in | 14 cm
• Microphone Diameter: 0.4 in | 10 mm
• Capsule Diameter: 0.21 in | 5.4 mm
• Weight (SC4098-BM15, MicroDot): 0.4 oz | 12 g, foam included