Zoom F8n Pro Multitrack Field Recorder

Share

Filmmakers and sound professionals know the importance of sharp, clean audio in storytelling. From the click of a seatbelt to the roar of an engine, the Zoom F8n Pro's 8 inputs and 10 tracks captures full dynamic range using 32-bit float technology. With its dual A/D converters and professional-grade preamps, capture clip-free audio without ever needing to adjust gain.

The F8n Pro has three outputs for external devices, headphones, and camera connections. You can keep tabs on your tracks pre- or post-fader, check levels, route signals to the left or right and set alert tones for battery and recording status.

Formatting Options
The F8n Pro records in BWF-compatible WAV formats up to 32-bit resolution and at sample rates up to 192 kHz.

Built-In Processing
The F8n Pro features flexible signal routing from all inputs to all outputs, phase inversion and Mid-Side decoding. It also provides high-pass filtering to reduce the sound of wind and other noise. Input and output delays are also available.

State-of-the-Art Timecode
Keep your tracks perfectly synced even when you power down. On or off, the F8n Pro's Temperature Compensated Crystal Oscillator (TCXO) generates time code at 0.2 ppm accuracy.

Stay Focused With Zoom Automix™
Zoom AutoMix lets you keep your eyes on the action by automatically adjusting the levels of your mix to reduce ambient sound.

Full Metadata Entry
The track name, scene names, notes, and more can be entered directly from the unit or via the Zoom F8 Control App for iOS.

Six Seconds of Audio
The pre-record function allows you to check your environment and settings, capturing up to 6 seconds of audio before you hit the RECORD button.

Record & Stream, Together
When connected to your computer, the F8n Pro can be used as a 8-in / 4-out audio interface. Record and stream in 32-bit float / 96khz while simultaneously recording to SD cards.

Go Mobile
The F8 Control App lets you monitor signals, adjust levels, trigger transport controls, enter metadata and more from your Android device, iPhone or iPad via Bluetooth.

Expanded Control
The Zoom F-Control (FRC-8, sold separately) gives you more flexibility in the field. With 60 mm faders and controls for trim, pan and track-arming, the FRC-8 is a must-have for any professional filmmaker.

Power Up
The F8n Pro is well-equipped for long location shoots or remote fieldwork, with a variety of power options and massive storage.

Onboard Power
Use eight AA alkaline batteries for 5 hours of power or plug in with the included AD-19 AC adapter.

Alternate Power
External 9-18 volt DC battery packs can be used with a 4-pin Hirose connector.

Dual Memory
Record simultaneously on two SD cards, up to 1TB each, allowing for redundant recording.

360° Audio
The F8n Pro's Ambisonics mode offers precision A-to-B decoding and balanced gain linking, enabling you to capture spatial audio for VR, AR and more. Download the FREE Zoom Ambisonics Player software to decode and edit your 360-audio with ease.

Zoom F8n - Features:

• 32-bit float recording technology
• 8-channel/10-track field audio recorder/mixer
• Records in BWF-compliant WAV format up to 192kHz/32-bit float
• 8 discrete inputs with locking Neutrik XLR/TRS combo connectors
• High quality mic preamps with up to 75 dB gain and less than -127 dBu EIN
• Switchable +4dB inputs with mic/line options for both XLR and TRS
• Accurate Time Code (0.2 ppm when on and up to 0.2 ppm when powered off) I/O on standard BNC connectors; dropframe/non-drop formats with Jam Sync
• Zoom AutoMix™ software
• Three different power supply options: 8x AA batteries, external DC battery pack with Hirose connector, or 12V AC adapter (AA’s and DC battery pack not included)
• High pass filter, phase invert, and Mid-Side decoder
• Dual mini-XLR (TA3) balanced Main Outs plus 1/8" stereo mini-jack Sub Out
• Dedicated headphone output (100 mW) with front panel volume control
• 2.4" full-color backlit LCD with monochromatic mode
• Dual SD/SDHC/SDXC card slots, up to 1 TB each
• Use as an 8-in/4-out USB audio interface
• Free Zoom F8 Control App for iOS and Android allows wireless remote control, file renaming, and metadata entry (Android app to be released March 2022)

Accessories:

Included

• Zoom F8n Pro Field Recorder
• Zoom AD-19 12V AC Adapter
• Operation manual

Optional

• F-Control (FRC-8)
• PCF-8n Field Bag
• ECM-3 Mic Capsule Extender Cable
• ECM-6 Mic Capsule Extender Cable
• CMF-8 Camera Mounting Bracket
• TXF-8 TA3 to XLR Cables

• Inputs:
  • Input 1 - 8 Connectors: XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot)
  • Input Source Set to Mic:
    • Input Gain: +10 to +75 dB
    • Input Impedance: 3 kΩ or more
    • Maximum Input Level: +4 dBu (at 0 dBFS)
    • Phantom Power: +24/+48V, 10mA maximum for each channel
  • Input Source Set to Line:
    • Input Gain: -10 to +55 dB
    • Input Impedance: 5 kΩ or more
    • Maximum Input Level: +24 dBu (at 0 dBFS)
  • Equivalent Input Noise: -127 dBu or less (A-weighted, +75dB input gain, 150 Ω input)
  • Frequency Response: 20 Hz to 60 kHz, +0.5dB/-1 kHz (192 kHz sample rate)
  • A/D Dynamic Range: 113 dB typ (-60dBFS input, A-weighted)
  • Crosstalk: -90 dB or less (between adjacent channels, 1 kHz)
  • MIC IN: ZOOM mic capsule input (use disables Inputs 1/2)
  • SLATE MIC: Built-in mic for voice memos can be assigned to tracks freely
• Outputs:
  • MAIN OUT 1/2:
    • Connectors: TA-3 connectors, balanced output (2: hot)
    • Output Impedance: 150 Ω or less
    • Reference Output Level: -10 dBV (normal output level), +4 dBu (Output Level: Line), 1 kHz, 600 Ω load
    • Maximum Output Level: +10 dBV (normal output level), +24 dBu (Output Level: Line), 1 kHz, 600 Ω load
  • SUB OUT 1/2:
    • Connectors: 3.5mm stereo mini (unbalanced output)
    • Output Impedance: 100 Ω or less
    • Reference Output Level: -10 dBV (normal output level), -40 dBV (mic output level), 1 kHz, 10 kΩ load
    • Maximum Output Level: +10 dBV (normal output level), -20 dBV (mic output level), 1 kHz, 10 kΩ load
  • HEADPHONE:
    • Connector: 1/4" stereo (unbalanced output)
    • Output Impedance: 18 Ω or less
    • Maximum Output Level: 100 mW + 100 mW (32 Ω load)
  • D/A Dynamic Range: 105 dB typ (-60dBFS input, A-weighted)
• Recording Media: Dual SD card slots; SDHC cards, 4GB - 32GB; SDXC cards, 64GB - 1TB
• Recording Formats:
  • When WAV Selected:
    • Supported Formats: 44.1/47.952/48/48.048/88.2/96/192kHz, 16/24-bit, mono/stereo//2-10ch poly, BWF and iXML
    • Maximum Simultaneous Recording Tracks: 10 (8 inputs + stereo mix), 8 (at 192 kHz sampling rate)
  • When MP3 Selected:
    • Supported Formats: 128/192/320kbps, 44.1/48kHz, ID3v1 tags
    • Maximum Simultaneous Recording Tracks: 2
• Recording Time Using 32GB Card:
  • 23:08:00 (48 kHz/32-bit float stereo WAV)
  • 5:47:00 (192 kHz/32-bit float stereo WAV)
• Time Code:
  • Connector: BNC
  • Modes: Off, Int Free Run, Int Record Run, Int RTC Run, Ext, Ext Auto Rec (audio clock can be synchronized to timecode)
  • Frame Rates: 23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND, 30D
  • Precision: ± 0.2 ppm
  • Supported Input Levels: 0.2 to 5.0 Vpp
  • Input Impedance: 4.6 kΩ
  • Output Level: 3.3 Vpp
  • Output Impedance: 50 Ω or less
• Power Supplies:
  • Batteries: 8 (alkaline, nickel-metal hydride or lithium)
  • AC Adapter: Zoom AD-19, DC12V 2A (center plus)
  • External DC Power Supply: HIROSE HR10A-7R-4S 4-pin connector (1 pin: -, 4 pin: +), 9-18V
  • Power Consumption: 15 W
• Continuous Recording Time:
  • When recording 2 channels to SD1 at 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) with MAIN/SUB OUT OFF, TIME CODE OFF, LED/LCD Brightness 5, 32 Ω headphones, PHANTOM OFF):
    • Alkaline Batteries: 6 hours or more
    • NiMH (2500 mAh): 8.5 hours or more
    • Lithium Batteries: 12 hours or more
  • When recording 8 channels to SD1 at 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) with MAIN/SUB OUT OFF, TIME CODE OFF, LED/LCD Brightness 5, 32 Ω headphones, PHANTOM OFF:
    • Alkaline Batteries: about 5 hours
    • NiMH (2500 mAh): about 7 hours
    • Lithium Batteries: about 10 hours
  • When recording 8 channels to SD1/2 at 192kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) with MAIN/SUB OUT ON, TIME CODE Int Free Run, LED/LCD Brightness 60, 32 Ω headphones, PHANTOM 48V:
    • Alkaline Batteries: about 0.5 hours
    • NiMH (2500 mAh): 1.5 hours or more
    • Lithium Batteries: 2.5 hours or more
• Display: 2.4" full-color LCD, 320x240
• USB:
  • Mass Storage Operation:
    • Class: USB 2.0 High Speed
  • Multi Track Audio Interface Operation (driver required for Windows, not required for Mac):
    • Class: USB 2.0 High Speed
    • Specifications: Sampling Rate - 44.1/48/88.2/96kHz sampling rate; Bit Depth - 24-bit linear/32-bit float, 8 in/4 out
  • Stereo Mix Audio Interface Operation (no driver required):
    • Class: USB 2.0 Full Speed
    • Specifications: Sampling Rate - 44.1/48kHz; Bit Depth - 16-bit linear, 2 in/2 out
  • Audio Interface Operation With Recording (driver required for Windows, not required for Mac)
    • Class: USB 2.0 High Speed
    • Specifications: Sampling Rate - 44.1/48 kHz; Bit Depth - 24-bit linear/32-bit float, 10 in/4 out
• External Dimensions (W x D x H): 7 x 5.5 x 2.1 in | 178.2 x 140.3 x 54.3 mm
• Weight: 2.65 lbs | 1,200 g