RODE AI-1 Complete Studio Kit with Audio Interface

Share

The RODE AI-1 Complete Studio Kit comes with the AI-1 USB audio interface, NT1 cardioid condenser microphone, SMR advanced shockmount with pop filter, premium XLR cable, USB cable, and a copy of Ableton Live Lite. With the kit, create an all-in-one solution for recording vocals and instruments in a project studio or while on the go.

AI-1 USB Audio Interface

The AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.

The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.

NT1 Cardioid Condenser Microphone

The NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE's HF6 1" capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.

The microphone's electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5 dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.

SMR Advanced Shock Mount

The Rode SMR is a professional-grade shock mount for large diaphragm condenser mics. Featuring a double-Lyre suspension system, the SMR enhances Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element.

The SMR's removable all-metal pop filter provides an integrated solution for plosive protection, that is washable and designed to last as long as the shock mount and microphone. The SMR's clamping system design utilizes a large surface area, allowing for ample friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is designed to better withstand the wear and tear of repeated use.

The SMR's frame is made from an engineering grade reinforced polymer. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.

A base nut is also included, suitable for all compatible Rode microphones.

• AI-1 USB Interface:
  • Computer Connectivity: USB
  • Form Factor: Desktop
  • Simultaneous I/O: 1 x 2
  • Number of Preamps: 1
  • Phantom Power: Yes
  • Bit Depth: 24-bit
  • Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Analog Inputs: (1) Neutrik XLR-1/4" combo
  • Analog Outputs:
    • (2) 1/4" (impedance balanced)
    • (1) 1/4" (headphones)
  • Direct Monitor: Yes
  • USB: USB Type C
  • Bus Powered: Yes
  • OS Requirements: Mac OS 10.10 or later; Windows 7 or later
  • Power: USB bus-powered
  • Dimensions (D x W x H) 3.9 x 4.9 x 1.5 in | 100 x 124 x 38 mm
  • Weight: 1 lb 3.7 oz | 560 g
  • Input:
    • XLR/Mic Input:
      • Dynamic Range: 104 dBA
      • Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20 Hz - 20 kHz, A-weighted): -128 dBA
      • Frequency Response (Measured after ADC): 20Hz - 20kHz better than ± 1 dB
      • Gain Range: 0dB - > 45 dB
      • Input Impedance: 1.3k Ohms
    • Instrument Input:
      • Dynamic Range: 99 dBA
      • Frequency Response (Measured after ADC): 20 Hz - 20 kHz better than ± 1 dB
      • Gain Range: 0 dB - > 45 dB
      • Input Impedance: 900k Ohms
  • Outputs:
    • Monitor Outputs:
      • Maximum Output Level: -6 dBu
      • Frequency Response: 20 Hz - 20 kHz better than ± 1 dB
    • Headphone:
      • Max Output Power @ 1% THD: 32 Ohms - > 210 mW; 300 Ohms - > 390 mW
• NT-1 Microphone:
  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 1-inch
  • Polar Pattern: Cardioid
  • Address Type: Side
  • Frequency Range: 20Hz - 20kHz
  • Output Impedance: 100 Ohms
  • Maximum SPL: 132 dB SPL
  • Maximum Output Level: 8.0mV (@ 1kHz, 1% THD into 1KOhm load)
  • Sensitivity: -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 4 dBA
  • Power Options: +24V phantom power; +48V phantom power
  • Output: XLR
  • Dimensions (H x W x D): 7.4 x 2.0 x 2.0 in | 187 x 50 x 50 mm
  • Weight: 15.5 oz | 440 g