Schoeps BLM 03 CG Boundary Layer Capsule

Share

The Schoeps BLM 03 Cg is an accessory for the Colette Microphone Series. A 5 meter long active cable hard-wired to the BLM 03 Cg allows it to be joined to any microphone amplifier of the Colette Series to become a complete microphone. The Schoeps CUT 1 and CUT 2 active low-cut filters can be used with the BLM 03 Cg.

The small dimensions of the BLM 03 CG and its matte gray surface allow for a particular unobtrusive placement. It can often be disguised or hidden, e.g. under a light tablecloth. It should be noted, however, that any boundary layer microphone must be placed on a sufficiently large sound-reflecting surface for adequate low-frequency reproduction. For speech applications, such as conference recording, a table-top may be sufficient. But most music pick-ups will require a larger surface.

• Frequency Range: 20 Hz - 20 kHz
• Sensitivity: 19 mV/Pa
• Equivalent Noise Level (A-Weighted): 12 dB-A
• Equivalent Noise Level (CCIR): 23 dB
• Signal-To-Noise Ratio (A-Weighted): 82 dB-A
• Maximum SPL at 0.5% THD: 128 dB-SPL
• Dimensions: 80 mm Diameter, 8.6 mm High
• Surface Finish: matte gray, non-reflective Nextel
• Cable Length: 5 m
• Weight: 233 g