Shure PSM 1000 Wireless Personal Monitor System

Share

NOTE: This Shure PSM 1000 Wireless Personal Monitor System—model P10TR+425CL-G10 in Band G10 470 - 542 MHz—comes with (1) P10T Dual Transmitter, (2) P10R+ Diversity Bodypack Receivers, (2) SE425 Earphones, antennas, front mount antenna cable, link bar, hardware kit, bumper kit, and zipper bags.

As a singer, musician, or audio professional, what you hear is fully half the battle in the largest arenas, biggest stages, and most crowded broadcasting events in the world. Shure PSM 1000 in-ear monitoring system delivers superb audio quality, pristine RF signal with more on-air channels, and a streamlined setup and use.

Touring-Grade Design and Performance

• Full-rack, dual channel wireless transmitter housed in a touring-grade, all-metal chassis
• Networked control via Ethernet connection vastly simplifies setup for high channel counts and enables remote control via Wireless Workbench® software
• Internal power supply with IEC in/out ports enables easy power chaining in the rack
• Backwards compatibility with PSM®900 receivers for simplified inventory management
• Diversity bodypack dramatically improves signal reception and increases range
• Precision front-end RF filtering reduces RF interference for a cleaner, stronger RF signal, fewer dropouts, and less audible artifacts
• CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels on one bodypack for quick and easy reference
• Backward compatible with PSM 900 transmitters and receivers (in the same frequency range) to facilitate streamlined inventory management for rental and touring

Robust RF Performance and Networked Control

• Up to 72 MHz Tuning Bandwidth (region dependent) provides flexibility in today’s crowded and unpredictable RF environments.
• Networked frequency coordination simplifies setup for high channel counts
  • Full bandwidth scan from the P10R bodypack receiver finds clean, compatible frequencies and provides a graphic spectrum plot viewable from the bodypack menu screen
  • Send the identified frequencies and spectrum plot to the P10T transmitter over IR sync
  • Program compatible frequency assignments from one transmitter to every other P10T transmitter on the network over Ethernet connection for vastly simplified and streamlined setup
  • Spectrum display provides a front-panel spectrum plot with selectable zoom
• Fully compatible with Wireless Workbench® 6, which provides advanced RF spectrum plotting, comprehensive frequency coordination, and live monitoring and adjustment of transmitter settings:
  • RF mute enable/disable
  • RF output power adjustments
  • Aux/line level
  • Audio input level
  • Channel/device name edit

Advanced Rechargeability Option

• The SB900 lithium-ion rechargeable battery provides extended usage times and precise tracking of remaining life and charge cycle details
• The SCB800-US eight-bay charger brings up to eight SB900 batteries to full charge within two hours and has charge status LEDs for each battery

The PSM 1000 Personal Monitor System from Shure brings personal monitoring to its most advanced level yet. The full-rack, dual-channel, networkable transmitter is ideally suited for the demands of professional touring and installation applications, and the diversity bodypack receiver delivers pristine RF signal and audio quality. Networkability over Ethernet connection enables remote control of transmitter functions and comprehensive frequency coordination via Wireless Workbench 6 software.

• PSM 1000 System:
  • RF Carrier Range: G10, 470 - 542 MHz
  • RF Output Power: 10 / 50 / 100 mW
  • Compatible Frequencies: 39 per band
  • Tuning Bandwidth: 72 MHz - 80 MHz (regionally dependent)
  • Operating Range (environment dependent): 300 ft | 90 m
  • Audio Frequency Response: 35 Hz - 15 kHz
  • Stereo Separation: 60 dB
  • Signal-To-Noise Ratio (A-Weighted): 90 dB (typical)
  • Total Harmonic Distortion (ref. ±34 kHz deviation @1 kHz): <0.5% (typical)
  • Companding: Patented Shure Audio Reference Companding
  • Spurious Rejection (ref. 12 dB SINAD): >80 dB (typical)
  • Frequency Stability: ±2.5 ppm
  • MPX Pilot Tone: 19 kHz (±0.3 kHz)
  • Modulation: FM, MPX Stereo (±34 kHz deviation, nominal)
  • Operating Temperature: -0.4 to +135° F | 18 to +57° C
• P10R+ Wireless Bodypack Receiver:
  • Tri-band RF Filtering: -3 dB at 30.5 MHz from the center frequency of each band
  • Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
  • RF Sensitivity (20 dB SINAD): 2.2 μV
  • Squelch Threshold: 22 dB SINAD (±3 dB), default setting
  • Adjacent Channel Rejection: >70 dB
  • Intermodulation Attenuation: >70 dB
  • Blocking: >80 dB
  • Image Rejection: >90 dB
  • Audio Output Power (1kHz @ <1% distortion, peak power, @16Ω): 100 mW per output
  • Minimum Load Impedance: 4 Ω
  • Output Impedance: <1 Ω
  • 4-Band Parametric EQ:
    • Low Shelf Selectable Gain: ±2 dB, ±4 dB, ±6 dB @100 Hz
    • Low Mid:
      Selectable Gain: ±2 dB, ±4 dB, ±6 dB @160 Hz, 250 Hz, 400 Hz, 500 Hz, 630 Hz
      Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
    • High Mid:
      Selectable Gain: ±2 dB, ±4 dB, ±6 dB @1 kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHz
      Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
    • High Shelf:Selectable Gain: ±2 dB, ±4 dB, ±6 dB @10 kHz
  • Volume Limiter Selectable: 0 dB to -48 dB in 3 dB steps
  • Volume Lock: Selectable: 0 dB to -70 dB
    Limits volume adjustment knob. Selected value analogous to volume knob increment.
  • Battery Life: 4 - 6 hours (continuous use) with AA batteries
  • Dimensions (H x W x D): 3.9 x 2.6 x 0.9 in | 99 x 66 x 23 mm
  • Weight: 5.6 oz | 158 g, without batteries
• P10T Dual Wireless Transmitter:
  • RF Output Power: Selectable: 10, 50, 100 mW (regionally dependent)
  • RF Output Impedance: 50 Ω (typical)
  • Power Requirement (RF on, 100 mW power mode, no audio):
  • Input: 100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded)
  • Output: 100-240V AC, 5A max, unswitched
  • Audio Input:
    • Connector Type: Combination XLR and 6.35 mm (1/4”) TRS
    • Polarity:
      • XLR: Non-inverting (pin 2 positive with respect to pin 3)
      • 6.35 mm (1/4”) TRS: Tip positive with respect to ring
    • Configuration: Electronically balanced
    • Impedance: 70.2 kΩ (actual)
    • Nominal Input Level: Switchable: +4 dBu, –10 dBV
    • Maximum Input Level:
      • +4 dBu: +29.2 dBu
      • -10 dBV: +12.2 dBu
    • Pin Assignments:
      • XLR: 1=ground, 2=hot, 3=cold
      • 6.35 mm (1/4") TRS: Tip = hot, Ring = cold, Sleeve = ground
    • Phantom Power Protection: Up to 60 V DC
  • Audio Output:
    • Connector Type: 6.35 mm (1/4”) TRS
    • Configuration: Electronically balanced
    • Impedance: Connected directly to inputs
  • Dimensions (W x H x D): 19 x 1.7 x 13.5 in | 483 x 44 x 343 mm
  • Weight: 10.4 lb | 4.7 kg