Shure P3TRA215CL PSM300 Professional Wireless Stereo Personal Monitor System With SE215 Earphones

Share

The Shure P3TRA215CL, part of the PSM 300 wireless systems family, features SE215 Sound Isolating Earphones, all-metal components with optional receiver rechargeability, and more advanced receiver controls. This system is ideal for more experienced users—rental companies, touring musicians, houses of worship, and the like.

PSM300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.

Shure P3TRA215CL Package Includes:

• SE215 Sound Isolating Earphones
• P3RA Professional Wireless Bodypack Receiver
• P3T Half Rack Single Channel Wireless Transmitter
• Rackmount and hardware kits
• 1/4 wave antenna
• BNC bulkhead adapter
• BNC cable
• Power supply
• Battery adapter kit
• (2) AA batteries
• Zipper bag
• User guide

CONSUMER ALERT: This particular wireless microphone device operates in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC's wireless microphone website or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).

• PSM300 System:
  • Frequency Range:
    • G20: 488 - 512 MHz (TV 17-21)
    • J13: 566 - 590 MHz (TV 30-34)
  • Compatible Frequencies Per Band: up to 15
  • Tuning Bandwidth: 24 MHz maximum (note: varies by region)
  • Operating Range: 90 m | 300 ft
  • Audio Frequency Response: 38 Hz - 15 kHz
  • Signal-To-Noise Ratio: 90 dB (typical)
  • Total Harmonic Distortion: <0.5% (typical) (ref. ±34 kHz deviation @ 1 kHz)
  • Companding: Patented Shure Audio Reference Companding
  • Spurious Rejection: > 80 dB (typical)
  • Frequency Stability: ± 2.5 ppm
  • MPX Pilot Tone: 19 kHz (± 1 Hz)
  • Modulation: FM, MPX Stereo (ref. ± 34 kHz deviation @ 1 kHz)
  • Operating Temperature: 0° to 145° F | -18° to +63° C
• SE215 Earphones:
  • Speaker: Dynamic MicroDriver for detailed sound with enhanced bass
  • Frequency Range: 22 Hz - 17.5 kHz
  • Sensitivity (1 kHz): 107 dB SPL/mW
  • Impedance (1 kHz): 20 Ω
  • Detachable Cable: 64" (162 cm) detachable (at ear) with wireform fit
• P3RA Professional Wireless Bodypack Receiver:
  • Active RF Sensitivity (@ 20 dB SINAD): 2.2 µV
  • Image Rejection: > 90 dB
  • Adjacent Channel Rejection: > 60 dB
  • Intermodulation Attenuation: > 50 dB
  • Blocking: > 60 dB
  • Audio Output Power (1 kHz @ <1% distortion, peak power, @32 Ω): 80 mW (per output)
  • Minimum Load Impedance: 16 Ω
  • Headphone Output: 3.5 mm (1.8") stereo
  • Battery Life:
    • 4 to 5.5 hours (continuous use) AA batteries
    • 5.5 to 7 hours (continuous use) SB900 rechargeable battery
  • Dimensions (H x W x D): 3.9 x 2.6 x 0.9 in | 99 x 66 x 23 mm
  • Weight: 6.9 oz | 196 g, with batteries
• P3T Wireless Transmitter:
  • RF Output Power: 10, 20, 30 mW (note: varies by region)
  • RF Output Impedance: 50 Ω (typical)
  • Power Requirements: 12 - 15 V DC, 260 mA maximum
  • Dimensions (H x W x D): 1.7 x 7.8 x 6.8 in | 43 x 198 x 172 mm
  • Weight: 27.6 oz | 783 g
  • Audio Input:
    • Connector Type: 6.35 mm (1/4") TRS
    • Polarity: Tip positive with respect to ring
    • Configuration: Electronically balanced
    • Impedance: 40 kΩ (actual)
    • Nominal Input Level: Switchable, +4 dBu, -10 dBV
    • Maximum Input Level:
      • +4 dBV: +22 dBu
      • 10 dBV: +12.2 dBu
  • Audio Output:
    • Connector Types: 6.35 mm (1/4") TRS
    • Configuration: Electronically balanced
    • Impedance: Connected directly to inputs