Shure P3TR112GR PSM300 Wireless Stereo Personal Monitor System With SE112 Earphones

Share

The Shure P3TR112GR, part of the PSM 300 wireless systems family, provides great sound and simple setup for entry-level users.

PSM300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.

Shure P3TR112GR Package Includes:

• SE112 Sound Isolating Earphones
• P3R Wireless Bodypack Receiver
• P3T Half Rack Single Channel Wireless Transmitter
• Rackmount and hardware kits
• 1/4 wave antenna
• BNC bulkhead adapter
• BNC cable
• Power supply
• (2) AA batteries
• Zipper bag
• User guide

CONSUMER ALERT: This particular wireless microphone device operates in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC's wireless microphone website or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).

• PSM300 System:
  • Frequency Range:
    • G20: 488 - 512 MHz (TV 17-21)
    • J13: 566 - 590 MHz (TV 30-34)
  • Compatible Frequencies Per Band: up to 15
  • Tuning Bandwidth: 24 MHz maximum (note: varies by region)
  • Operating Range: 90 m | 300 ft
  • Audio Frequency Response: 38 Hz - 15 kHz
  • Signal-To-Noise Ratio: 90 dB (typical)
  • Total Harmonic Distortion: <0.5% (typical) (ref. ±34 kHz deviation @ 1 kHz)
  • Companding: Patented Shure Audio Reference Companding
  • Spurious Rejection: > 80 dB (typical)
  • Frequency Stability: ± 2.5 ppm
  • MPX Pilot Tone: 19 kHz (± 1 Hz)
  • Modulation: FM, MPX Stereo (ref. ± 34 kHz deviation @ 1 kHz)
  • Operating Temperature: 0° to 145° F | -18° to +63° C
• SE112 Earphones:
  • Speaker: Single Dynamic MicroDriver for great sound plus deep bass
  • Frequency Range: 25 Hz - 17 kHz
  • Sensitivity (1kHz): 105 dB SPL/mW
  • Impedance (1kHz): 16 Ω
  • Cable: 50 in | 127 cm
• P3R Wireless Bodypack Receiver:
  • Active RF Sensitivity (@ 20 dB SINAD): 2.2 µV
  • Image Rejection: > 90 dB
  • Adjacent Channel Rejection: > 60 dB
  • Intermodulation Attenuation: > 50 dB
  • Blocking: > 60 dB
  • Audio Output Power (1 kHz @ <1% distortion, peak power, @32 Ω): 80 mW (per output)
  • Minimum Load Impedance: 16 Ω
  • Headphone Output: 3.5 mm (1.8") stereo
  • Battery Life: 5 to 7 hours (continuous use) AA batteries
  • Dimensions (H x W x D): 4.3 x 2.5 x 0.8 in | 110 x 64 x 21 mm
  • Weight: 3.5 oz | 98 g
• P3T Wireless Transmitter:
  • RF Output Power: 10, 20, 30 mW (note: varies by region)
  • RF Output Impedance: 50 Ω (typical)
  • Power Requirements: 12 - 15 V DC, 260 mA maximum
  • Dimensions (H x W x D): 1.7 x 7.8 x 6.8 in | 43 x 198 x 172 mm
  • Weight: 27.6 oz | 783 g
  • Audio Input:
    • Connector Type: 6.35 mm (1/4") TRS
    • Polarity: Tip positive with respect to ring
    • Configuration: Electronically balanced
    • Impedance: 40 kΩ (actual)
    • Nominal Input Level: Switchable, +4 dBu, -10 dBV
    • Maximum Input Level:
      • +4 dBV: +22 dBu
      • 10 dBV: +12.2 dBu
  • Audio Output:
    • Connector Types: 6.35 mm (1/4") TRS
    • Configuration: Electronically balanced
    • Impedance: Connected directly to inputs