PSC RF Multi SMA

Share

The PSC RF Multi SMA contains two, separate, active 1 x 8 RF splitters for use with up to eight diversity receivers. This compact, rugged device was designed using the latest super low noise amplifiers and will operate over an extended frequency range of 470 to 960 MHz broken into three options:

• Single Band - 470 to 700 MHz
• Dual Band - 470 to 618 MHz and 940 to 960 MHz
• Wide Band - 470 to 960 MHz

Its two inputs are traditional BNC connectors for ease of use in interfacing with your external antennas. Each of the outputs offers a typical isolation factor of 24 to 28dB between radio receivers.

The PSC RF Multi SMA also has the ability to power external powered antennas or remote line amplifiers. There are two top panel mounted switches. One controls overall power and the second switch provides remote antenna power when needed. Both switches light up when in use. This unit is powered from any external DC source of 10 to 15Vdc via the bottom panel mounted 4 pin Hirose connector. A sturdy belt clip is included for ENG bag use.

• Frequency Range:
  • Single Band - 470 to 700 MHz
  • Dual Band - 470 to 618 MHz and 940 to 960 MHz
  • Wide Band - 470 to 960 MHz
• Power: External DC, 10-15Vdc, 120mA
• Input Impedance: 50 ohms
• Output Impedance: 50 ohms
• Maximum Input Level: +13dB
• Noise Figure: 0.8 dB
• Chassis: Aircraft aluminum
• Finish: Black epoxy powder C
• Housing Size: 4.275 x 1.385 x 1.625 in | 108 x 35 x 41 mm
• Weight: 6.5 oz | 185 g