Categories

Accept Credit Cards

Wisycom MCR42S Dual True Diversity UHF Miniature Camera Receiver - BN Band (470 to 700 MHz)

Wisycom MCR42S Dual True Diversity UHF Miniature Camera Receiver - BN Band (470 to 700 MHz) Wisycom MCR42S Dual True Diversity UHF Miniature Camera Receiver - BN Band (470 to 700 MHz)
With $99 Purchase »
Your Price: $2,350.00
List Price: $2,554.00

Availability: Out of Stock
Quantity:
Manufacturer:

Sales SKU: WSYMCR42S-BN
Product Code: MCR42S BN

The Wisycom MCR42S is a camera receiver designed for best-in-class performance. Four receivers are internally coupled by two in a real true diversity configuration. Its front end has a chain of micro-controlled-driven movable filters to allow broadband operation of up to 240 MHz with great selectivity.

A powerful low consumption DSP gives you the best of analog and digital technologies in an hybrid approach for smooth operations, high coverage, and with a Wisycom-patented PTT (push-to-talk) already integrated.

Wisycom MCR42S Receiver - Features:

  • Dual true diversity in a modular stand-alone or slot-in format
  • Switching bandwidth up 240 MHz in the UHF range
  • DSP-based audio processing for unbeatable audio and digital outputs with integrated PTT (push-to-talk) patented technology
  • 40 groups of 60 frequencies fully user programmable
  • Multicompander operations
  • Infrared interface for programming and transmitter synchronization
  • Wisycom exclusive digital sub-carrier telemetry technology allows:
    – remote TX battery monitoring
    – tone-squelch operating
    – PTT function (An optional back-panel module is available, with the secondary intercom output)
  • Easy setup and operation thru an OLED display

NOTE: This MCR42S receiver is for the BN Band (470 to 700 MHz) option and for the module only. To operate fully, either of these related adapter kits are required: BPA42PTT 'Stand Alone' Rear Panel Kit or SLK42-IKSS Superslot/Unislot Mount Adapter. For a different band option or adapter kit, please call to place a special order.

  • Frequency Range: N Option (470 to 700 MHz)
  • Switchable Channels: 2400 managed in 40 groups of 60 frequencies completely user customizable
  • Switching-Window: Up to 232 MHz
  • Frequencies: Microprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step; frequencies are easily PC reprogrammed with optional UPK300E/UPKmini programmer
  • Frequency Error: ± 2.5 ppm, in the rated temperature range
  • Modulation: FM, with de-emphasis
  • Nominal Deviation: ± 40 kHz (Max. operating dev. = ± 60 kHz)
  • "A" / "B" Antenna Inputs: With SMA connectors
  • Antenna Input Impedance: 50 Ω SMA type (SWR < 1:2; typ. 1:1.4)
  • Sensitivity: 2 µV ( 6 dBµV), for SND/N > 58 dB; 5 µV (14 dBµV), for SND/N > 98 dB in the whole switching-window
  • Amplitude Response: < 0.5 dB (RF input sig.: 6 dBµV ÷ 100 dBµV)
  • Co-Channel Rejection: > 2.5 dB
  • Adjacent Channel Selectivity: > 80 dB typical (for channel spacing ≥ 400 kHz)
  • Spurious Receiver Rejection: > 100 dB
  • IF Image Rejection: > 90 dB
  • Intermod. Rejection: > 76 dB
  • IIP3: > +10 dBm typical
  • Spurious Emissions: < 2 nW (typical = 0.1 pW
  • Noise Reduction System:
    • ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
    • ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
    • Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user-programmable
  • AF Bandwidth: 30 Hz - 20 kHz
  • Frequency Response: ± 0.5 dB in the 30 Hz - 19 kHz ran
  • Distortion: MCR42S: 0.3 % typical MCR42S2/S3: 0.1 % typical
  • SND/D Ratio (Analog): 110 dB typical
  • SND/D ratio (AES3): MCR42S: >125 dB typical MCR42S2/S3: >140 dB typical
  • Audio Output: 2 audio line-outpus electronically balanced on two 3 pin mini-XLR Female connector
  • Audio Output Level: Adjustable 1 dB step between (peak dev level): -30dBu [MCR42S/S2/S3] /-18dBu [MCR42] to +12dBu [MCR42/S/S2] / +18dBu [MCR42S3]
  • Audio Line-Output Impededance: ± 200 Ω
  • PTT Line-Output 1 & 2: Electronically balanced on a 5 pin mini-XLR Male connector
  • Digital Output: Digital line-output 1 & 2 electronically balanced on 3 pin mini-XLR Male connector
  • Digital Sample Rate: AES3 @ 48 kHz
  • Power LEDs:
    • NEW Display: 1 multicolor RGB LEDs for the power status of the receiver
    • OLD Display: 2 multicolor RGB LEDs to easy indicate Rx1 & Rx2 power status
  • RF LEDs: 2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 RF status. Always on in normal operation
  • Audio LEDs: 2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 audio status
  • Front Buttons: Simple operation with 4 buttons to quickly monitor and setup the receiver. One touch function for a frequency scan and sync function.
  • Powering:
    • External = 5 - 18 Vdc (1.5 W max)
    • Autonomous = with optional BCA 42 Battery Module (5 x IEC-LR6 1.5V size-AA alkaline or rechargeable elements)
  • Power Consumption: Max 125mA @ 12V, approx. 6 hours (with battery pack BCA42)
  • Battery Life: Approx. 6 hours with battery pack BCA42 (5 x IEC-LR6 1.5V size-AA alkaline)
  • Temperature Range: 14 to +131° F | -10 to +55° C
  • Dimensions (H x W x D):
    • Slot-In Execution: 4.5 x 2.7 x 0.7 in | 115 x 68 x 18 mm
    • Stand-Alone Execution: 5.3 x 2.7 x 0.7 in | 135 x 68 x 18 mm
  • Weight: Approx. 180g

Related Products

Copyright 2024 Location Sound Corp.